Is the GT1R Front Drag Pack the Ultimate Upgrade for Your Nissan GT-R?

If you are a car enthusiast, you know the feeling. You press the gas pedal, the engine roars, and you wait for that push back into your seat. But if you are building a serious race car, especially a Nissan GT-R, you might notice a problem. You have plenty of power, but you can’t use it all. The tires spin, the car fights for grip, and you lose precious time.

To go fast, you need more than just a big engine. You need to get that power to the ground efficiently. This is where your wheels and tires come in. Today, we are going to dive deep into a specialized upgrade designed for the Nissan GT-R (R35): the GT1R Front Drag Pack Wheels.

This isn’t just a set of shiny rims to make your car look cool at a car show. This is a dedicated racing tool. It is a secret weapon for racers who want to dominate the quarter-mile. In this guide, we will break down exactly what makes these drag wheels so special, why the GT-R needs them, and the science behind why they make you faster.

The Science of Speed: Horsepower vs. Traction

Before we talk about the product, we need to understand the problem. Imagine you have a rocket engine attached to a skateboard. If the wheels are slippery, the rocket will fire, but the skateboard will just spin its wheels and go nowhere.

This is what happens in drag racing. You can have 1,000 horsepower, but if your tires cannot grip the pavement, a car with only 500 horsepower might beat you. This is called “traction.”

Regular car wheels are made for the street. They are designed to handle potholes, rain, and thousands of miles of driving. Drag wheels, on the other hand, have one specific job: to launch your car from a dead stop as violently and quickly as possible. To do this, they need to be lightweight and strong, and they need to hold a very specific type of tire.

The Unique Challenge of the Nissan GT-R

Most drag cars, like Mustangs or Camaros, are Rear-Wheel Drive (RWD). This means the engine only turns the back wheels. For those cars, you put big tires on the back and tiny “skinny” wheels on the front.

But the Nissan GT-R is a monster because it is All-Wheel Drive (AWD). The engine sends power to all four wheels. This is what makes the GT-R so fast off the starting line. However, this also creates a unique challenge.

Because the front wheels are helping to pull the car forward, they need just as much grip as the rear wheels. You cannot put skinny tires on the front of a GT-R if you want to set records. You need a wide, sticky tire on the front to match the back. The GT1R Front Drag Pack was engineered specifically to solve this problem.

Why You Need the GT1R Front Drag Pack

There are three major reasons why serious racers switch from factory wheels to this setup: Traction, Stability, and Weight.

1. The Magic of the 17-Inch Wheel

The factory Nissan GT-R comes with massive 20-inch wheels. While they look great, they are terrible for drag racing.

• The Problem: A 20-inch wheel leaves very little room for rubber. The tire ends up being a thin strip, like a rubber band. Thin tires are stiff. When you launch, they don’t flex.
• The Solution: The GT1R pack uses a 17-inch wheel. By using a smaller wheel, you can use a tire with a much taller sidewall.
• The “Wrinkle” Effect: A tall tire acts like a spring. When the car launches, the tire physically twists and wrinkles. This absorbs the shock and allows the tire to bite into the track. This is the key to cutting down your 60-foot times (the first and most important part of a drag race).

2. Stability at High Speeds

When you start making big power, street tires will spin. You need “slicks”—racing tires that have no tread pattern and are sticky like chewing gum.

This kit allows you to run a matching slick tire on the front. If you mix a slippery street tire on the front with a sticky race tire on the back, the car can feel “sketchy” or wobbly when you are going 150 mph. By having the same grip on all four corners, the car drives straight and true, keeping you safe.

3. Massive Weight Reduction

In racing, weight is the enemy. But not all weight is created equal. The worst kind of weight is “rotational mass” things that spin, like wheels and brakes.

Imagine trying to spin a heavy bowling ball with your hand. Now imagine spinning a light basketball. The basketball accelerates much faster with less effort. The factory wheels and brakes on a GT-R are very heavy.

The GT1R Front Drag Pack is made from forged aluminum, which is incredibly light. Combined with the required brake changes, this setup can save over 30 lbs per corner. That is over 60 lbs of rotating weight removed from the front of the car. This helps the engine rev faster and allows the suspension to work better.

The Engineering Behind the Pack

This product stands out in the world of motorsport performance parts because of the thought put into it.

The Necessary Brake Conversion

You cannot simply bolt 17-inch wheels onto a stock GT-R. The factory brakes are gigantic and physically will not fit inside the smaller wheel barrel. To use these drag wheels, you must convert your front brakes. The GT1R pack includes a specific small brake kit. This replaces the giant stock rotors and calipers with high-performance racing brakes that are smaller and lighter. This isn’t just about fitting the wheel; it is a huge part of where the weight savings come from.

Beadlock Technology

If you look at these wheels, you will see a ring of bolts around the outer edge. This is called a “beadlock.”

• Why do you need it? When a high-horsepower AWD car launches, the tire grips the track so hard that the metal wheel can actually spin inside the tire. This wastes power and ruins the wheel balance.
• How it works: A beadlock acts like a vise grip. It physically clamps the edge of the tire (the bead) to the wheel using a locking ring. This ensures that the tire cannot slip, transferring 100% of your engine’s power directly to the pavement.

Why Trust T1 Race Development?

When you are modifying the suspension and braking system of a car capable of extreme speeds, you need to trust the source.

T1 Race Development is a legendary name in the GT-R community. They are known for building some of the fastest GT-Rs on the planet. They didn’t just pick these parts out of a catalog; they engineered this solution because they needed it for their own record-breaking race cars.

They understand that safety is just as important as speed. By designing a kit that works with proper racing brakes, T1 Race Development ensures that you can slow down safely after you cross the finish line. When you buy from them, you are getting a solution engineered by pros who race what they sell.

Upgrading to the GT1R Front Drag Pack is one of the best moves you can make if you are serious about racing your AWD machine. It solves the physics problems of drag racing by giving you the grip to launch hard, the stability to stay safe, and the weight reduction to go faster.

Don’t let heavy stock wheels hold you back. If you want to see your lap times drop and feel the true power of your engine, it is time to look into proper drag wheels. Your car will thank you for it!

Frequently Asked Questions

Can I use the GT1R Front Drag Pack on the street? 

These drag wheels are designed specifically for the track. The 17-inch size is meant for racing slicks, which do not have tread for rain and are not safe for highway use. While you could technically drive on them, they are engineered for drag racing performance, not daily commuting or wet weather safety.

Why do I need 17-inch wheels instead of the factory size? 

Factory wheels are often 20 inches, which limits your tire choices. Switching to 17-inch wheels allows you to use taller sidewall racing tires. This taller sidewall acts like a spring, absorbing the shock of a hard launch and helping the tire “wrinkle” for better grip, which is crucial for lowering your quarter-mile times.

Do these wheels require special brakes? 

Yes. The factory brakes on a Nissan GT-R are very large and will not fit inside a 17-inch wheel. The GT1R Front Drag Pack requires a specific small brake kit to clear the wheel barrel. This conversion reduces weight significantly but requires changing your front rotors and calipers to the compatible racing spec.

What is the benefit of a beadlock wheel for my GT-R? 

When an AWD car like the GT-R launches with high horsepower, the tire can physically spin on the rim because the grip is so intense. A beadlock wheel clamps the tire bead to the rim using a locking ring. This prevents the tire from slipping, ensuring that every bit of horsepower is transferred directly to the track.

How much weight will I save with this setup? 

The savings are massive. Factory wheels and brakes are heavy. By switching to the lightweight T1 Race Development drag pack and the required small brake kit, you can save over 30 lbs per corner in “unsprung weight.” This helps the suspension work better and makes the car accelerate much faster than just removing cargo weight.

Please follow and like us: